Skip to main content

Getting Started

Here you can check how to build your capibaraZero. The project, actually, need an ESP32-S3 to enjoy all the features, SD card socket, 5 push buttons and some external modules that are listed below. Or you can buy ready board like LilyGo T-Embed CC1101

External module​

There are some features that need external module in order to work:

  • ST7789 display
  • NFC(PN532)
  • SubGHZ(SX1276)
  • IR(IR emitter + receiver)

After building capibaraZero board, you must flash firmware. You can download the latest from here